124
Loading Measured Data
10.6 Loading Measured Data
The measured data in the SD memory card and internal memory can be loaded to the instrument to
check the measured values.
1
Verify that an SD memory card has been
inserted before loading data from it.
(
appears on the screen)
2
Press the [FILE] key to display the FILE,
SD card screen or FILE, Internal memory
screen.
3
Select a folder to load.
Select
Load
Navigate within
hierarchy
(as necessary)
Folder for the measured data
SD memory card:
/PQ3100/YYMMDDXX or
/PQ3100/HIOKI (desired folder name)XX
Internal memory:
/YYMMDDXX or
/HIOKI (desired folder name)XX
Screen sample:
/PQ3100/HIOKI00 folder on the FILE, SD card
screen
The measured data will be loaded to the
instrument.
After the loading is complete, the EVENT, Event
list screen is displayed.
The data that has been loaded will be retained
until a new recording is started or the power is
turned off.
To Next Page
Loading...
Need help?
General
