40
Initial Measurement Preparations
Setting the language, clock, and measurement frequency
When you turn on the instrument for the rst time after purchase, the language setting screen, clock
setting screen, and frequency setting screen will be displayed. Congure these settings.
Similarly, these settings must be congured if a factory reset (p. 77) is performed to reset the
instrument to its default settings.
1
Turn on the instrument. (p. 44)
2
Select the display language.
Move the cursor
Japanese
English
Chinese Simple
Chinese Trad
Korean
German
French
Italian
Spanish
Turkish
3
Set the date and time.
Move the cursor
Change the value
The seconds cannot be set. If you press the
[Enter] key after changing value, the seconds
will be set to 00.
4
Select the frequency for the measuring
object using the function keys.
Move the cursor
The WIRING, wiring setting screen will be
displayed.
Once you have set the display language, time, and measurement frequency, this settings screen will not be
shown again when the instrument is turned on.
You can change these settings on the setting screen.
See Display language, time“System Settings” (p. 75), and measurement frequency“SET UP, Measurement
Settings 1 screen” (p. 64).
To Next Page
Loading...
Need help?
General
