11
Operating Precautions
Using AC Adapter
WARNING
• Use only the supplied Model Z1002 AC ADAPTER. AC adapter rated input voltage
range is 100 to 240 V AC at 50/60 Hz. To avoid electrical hazards and damage to
the instrument, do not apply voltage outside of this range.
• Turn the instrument off before connecting the AC adapter to the instrument and
to AC power.
• To avoid electrical accidents and to maintain the safety specications of this
instrument, connect the power cord provided only to an outlet.
CAUTION
Avoid using an uninterruptible power supply (UPS) or DC/AC inverter with rectangular
wave or pseudo-sine-wave output to power the instrument. Doing so may damage the
instrument.
Turning On the Instrument
WARNING
Before turning the instrument on, make sure the supply voltage matches that
indicated on its power connector. Connection to an improper supply voltage may
damage the instrument and present an electrical hazard.
CAUTION
• Do not connect the supply voltage improperly. Doing so may damage the instrument’s
internal circuitry.
• If the power does not turn on, the AC adapter or the instrument may be malfunctioning
or the power cord may be disconnected. Contact your authorized Hioki distributor or
reseller.
• If an error during the self-test, the instrument is damaged. Contact your authorized Hioki
distributor or reseller.
Using Magnetic Adapter
DANGER
Persons wearing electronic medical devices such as a pacemaker should not use
the Magnet Adapter. Such persons should avoid even proximity to the Magnet
Adapter, as it may be dangerous. Medical device operation could be compromised,
presenting a hazard to human life.
CAUTION
Do not bring the Magnet Adapter near magnetic media such as oppy disks, magnetic
cards, pre-paid cards, or magnetized tickets. Doing so may corrupt and may render
them unusable. Furthermore, if the Magnet Adapter is brought near precision electronic
equipment such as computers, TV screens, or electronic wrist watches, they may fail.
10
9
8
7
6
5
4
3
2
1
Appx. Ind.