48
Wiring Method and Declared Input Voltage Settings
4.2 Wiring Method and Declared Input Voltage
Settings
Press the [WIRING] key to display the WIRING, wiring settings screen.
Sets the wiring method and declared input voltage.
1
2
The wiring diagram (p. 50) of the specied wiring mode is displayed.
Voltage value (RMS value)
Current value (RMS value)
Active power
Displacement Power Factor
(Fundamental power factor)*
Move the cursor
Select
*: DPF (Displacement Power Factor) is displayed as the power
factor irrespective of PF/Q/S calculation method settings
of the SET UP, measurement settings 2 screen in the
WIRING, wiring setting screen.
See “SET UP, Measurement Settings 2 screen” (p. 66),
and “Terminology” (p. Appx.24).
To Next Page
Loading...
Need help?
General
