Hioki PQ3100 - Page 39

33
Screen Display
No. Display Description Reference
2
The instrument is operating with the AC adapter. p. 43
The instrument is running on the battery. p. 38
(Blinking)
The instrument is running on the battery, which is almost out of charge.
Connect the AC adapter and charge the battery.
p. 38
3
(Black)
The LAN is connected. p. 138
(Blue)
The HTTP server is connected. p. 143
4
The key lock is engaged. p. 21
5
Holding the screen display.
p. 58
p. 81
6
(Black) The SD memory card is inserted and identied.
p. 42
(Red) The SD memory card is locked. Unlock it.
7
The VT ratio has been set.
p. 64
8
The CT ratio has been set.
9
Wiring, voltage range, and current range for CH1 to CH3.
(Red): No current sensors are connected. Otherwise, the sensors
are erroneously congured. (p. 52)
(Yellow): The current sensors are correctly congured.
p. 48
p. 64
10
Voltage range and current range for CH4. When CH4 is OFF, no icon is
displayed.
(Red): No current sensor is connected. Otherwise, the sensor is
erroneously congured. (p. 52)
(Yellow): The current sensor is correctly congured.
11
Declared input voltage.
12
Measuring frequency (nominal frequency). p. 64
13
(Black background)
The SD memory card has been inserted in the instrument. p. 42
(Green background)
The SD memory card is being accessed.
MEM
(Black background)
As no SD memory card is inserted to the instrument, measured data will
be saved in the instrument’s internal memory.
The shortest recording interval of the internal memory is 2 s. If the
interval is set to 1 s or less, measured data cannot be saved in the
internal memory.
MEM
(Green background)
The internal memory is being accessed.
14
Indicates how much recording time or days remains on the SD memory
card or in the instrument’s internal memory. If the event data is recorded
as well, the actual recording time will become shorter than the displayed
recording time.
The utilization status is indicated with a level meter.
1
Overview