103
5
Various Functions
5.1 Time Control Function
The time control function can control the auto-save operation and the integration function by
specifying time. Two control methods are available: timer control and real time control. Valid
settings depend on the integration control method.
See “Integration measurement while using the time control function” (p. 70) and “Automatically
saving measured data” (p. 126).
Timer control
The timer control stops auto-save operation and integration automatically once the timer control
time has elapsed.
• If the real-time-control time has been set so that it is longer than the timer-control time, integration
will start at the real-time-control start time and stop at the timer-control time. (The real-time-
control stop time will be ignored.)
• If you press the START/STOP key before the timer control ends, integration will stop, and
integrated values will be retained. If the START/STOP key is pressed again in this state,
integration will resume and will be performed for the duration of the timer setting. (cumulative
integration).
Timer set value
This can be set when [Timer] is set to [ON]. Enter the value using the numeric keypad window
(p. 22).
Valid setting range: 0 h 0 min. 10 s to 9999 h 59 min. 59 s
Real time control
The real time control can start or stop operation at predetermined times.
• If the real-time-control time has been set so that it is longer than the timer time, integration will
start at the real-time-control start time and stop at the timer time. (The real-time-control stop time
will be ignored.)
• If you set a time earlier the present time, the real time control is assumed to be disabled.
• If the integration is stopped during the real-time-control operation, the real time control is
disabled.
Start time and stop time
The start time and stop time can be set when [Real time control] is set to [ON]. Use the numeric
keypad window (p. 22).
Use the 4-digit year and 24-hour format. The times can be set in increments of 1 min.
Example: 1:11 pm on January 11, 2022 → [2022/1/11 13:11:00]
Upper limit for time
Start time 2099/12/31 23:59:59
Stop time 2099/12/31 23:59:59
5 Various Functions
Various Functions
To Next Page
Loading...
Need help?
General
