Hioki PW8001-01 User Manual

181
10
Specications
10.1 General Specications
Operating
environment
Indoor use, pollution level 2, altitude up to 2000 m (6562 ft.)
Operating
temperature and
humidity range
0
°
C to 40
°
C (32
°
F to 104
°
F), 80% RH or less (non-condensing)
Storage
temperature and
humidity range
−10
°
C to 50
°
C (14
°
F to 122
°
F), 80% RH or less (non-condensing)
Dust resistance
and water
resistance
IP20 (EN 60529)
The protection rating for the enclosure of this instrument (based on EN 60529) is *IP20.
Standards Safety EN 61010
EMC EN 61326 Class A
Power supply Commercial power supply
Rated supply voltage: 100 V to 240 V AC
(Assuming voltage uctuation of
±
10%)
Rated power-supply frequency: 50 Hz, 60 Hz
Anticipated transient overvoltage: 2500 V
Maximum rated power: 230 VA
Backup battery
life
Lithium battery About 10 years (Reference value at 23
°
C)
Time and setting conditions
Dimensions Approx. 430W
×
221H
×
361D mm (16.93″W
×
8.7″H
×
14.21″D) (excluding protruding parts)
Weight Approx. 14 kg (493.8 oz., PW8001-15 with four U7001 and four U7005 installed)
Product warranty
duration
3 years (also applied to installed input modules)
Accuracy
guarantee
conditions
Accuracy guarantee duration: 12 months
(for voltage, current, power of the U7001 and U7005, for power of the motor analysis option:
6 months)
(1.5 times reading errors of each specied accuracy are guaranteed for 12 months.)
Accuracy guarantee duration after adjustment made by Hioki: 12 months
(for voltage, current, power of the U7001 and U7005, for power of the motor analysis option:
6 months after adjustment made by Hioki)
(1.5 times reading errors of each specied accuracy are guaranteed for 12 months.)
Accuracy guarantee temperature and humidity range: 23
°
C
±
3
°
C (73
°
F
±
5
°
F), 80% RH or
less
Warm-up time: 30 minutes or longer
Other conditions: Within the e󰀨ective measurement ranges, sine waveforms or DC input, a
line-to-earth voltage of 0 V
After zero adjustment has been performed and a change in an ambient temperature does
not exceed
±
1
°
C after zero adjustment.
Accessories See p. 2.
Options See p. 3.
*IP20
This indicates the degree of protection provided by the enclosure of the instrument for use in hazardous locations,
entry of solid foreign objects, and the ingress of water.
2: Protected against access to hazardous parts with ngers. The equipment inside the enclosure is protected against
entry by solid foreign objects larger than 12.5 mm in diameter.
0: The equipment inside the enclosure is not protected against the harmful e󰀨ects of water.
10 Specications
Specications
HIOKI PW8001A961-00

Hioki PW8001-01 Specifications

General

Brand	Hioki
Model	PW8001-01
Category	Measuring Instruments
Language	English