231
11
Maintenance and Service
11.1 Repairs, Inspections, and Cleaning
WARNING
Do not attempt to modify, disassemble, or repair the instrument or
measurement modules yourself.
The internal components of the instrument and measurement modules may carry
high voltages. Attempting the above may cause bodily injury or re.
CAUTION
If any protective function of the instrument is damaged, immediately request
repair or dispose of the instrument.
If you must store the instrument, label it as damaged.
Failure to do so could result in bodily injury.
IMPORTANT
Halt use in the event of the following conditions.
• If the instrument is clearly damaged
• If the instrument is not capable of measurement
• If the instrument has been stored for an extended period of time in an undesirable environment,
for example under conditions of high temperature and humidity
• If the instrument has been subjected to stress due to shipment under harsh conditions
• If the instrument is wet or soiled with a large amount of oil or dust (If the instrument gets wet or
oil and dust get inside it, internal insulation may deteriorate, posing a signicant risk of electric
shock or re.)
• If the instrument is unable to save measurement conditions
Calibration
The calibration interval depends on factors such as the operating conditions and environment.
Please determine the appropriate calibration interval based on your operating conditions and
environment and have Hioki calibrate the instrument accordingly on a regular basis.
Backing up data
When repairing or calibrating the instrument, we may initialize it. It is recommended to back up (save/
write) data such as the settings and measured data before requesting service.
11 Maintenance and Service
Maintenance and Service
To Next Page
Loading...
Need help?
General
