171
Sending Data Using the FTP Client Function
Data send time
(Transfer time [s]) = (File size [KB]) / (Transfer speed [KB/s]) + (Transfer preparation time [s])
For details about the le size, see “Recordable time and data” (p. 127).
For reference, assume that the transfer speed is 4 MB/s and the transfer preparation time is 3 s.
Example: When the le size is 40 MB
(Transfer time) = 40 (MB) / 4 (MB/s) + 3 (s)
= 10 + 3 (s) = 13 (s)
Checking FTP communication status
The FTP communication status can be checked.
The numbers of les, such as those the FTP client successfully sent and failed to send, are
displayed.
Display screen [SYSTEM] > [COM]
11
1
Tap the [Setup] box under [FTP client]
to open the setting window.
22
2
Check the numbers of les under [FTP
communications status].
The following occasions zero the counters.
• When [Clear] is tapped
• When the instrument is turned on
Once a le fails to be sent, the Unsent count increases by one. After a certain period, the le is
retransmitted, reducing the Unsent count by one. Successful transmission of this le increments the
Sent count by one, and failure increments the Failed count by one.
Tapping [Clear] zeros all counters and stops retransmission of unsent les.
Connecting with computers
To Next Page
Loading...
Need help?
General
