Hioki PW8001-01 - Page 213

207
Detailed Specications of Measurement Parameters
Units and display ranges of measurement items
Measurement item Setting Unit Display range*
2
Polarity
(+/−)
Ch. A,
Ch. E
Torque
Analog DC
N·m
0% to 150% of the range

Frequency
0% to 150% of the rated torque
setting

Voltage Analog DC
V, user-
specied
0% to 150% of the range

Pulse frequency Pulse Hz
Ch. B,
Ch. F
RPM Pulse r/min
Pulse frequency Pulse Hz
Ch. C,
Ch. G
Torque
Analog DC
N·m
0% to 150% of the range

Frequency
0% to 150% of the rated torque
setting

RPM Analog DC r/min 0% to 150% of the range

Voltage Analog DC
V, user-
specied
0% to 150% of the range

Pulse frequency Pulse Hz
Ch. D,
Ch. H
RPM Pulse r/min
Pulse frequency Pulse Hz
Pm Motor power W 0% to 150% of the Pm range

Slip Slip % 0.000 to 100.000

*2: When scaling is set, add the scaling value to the range.
No peak-over detection is performed for measured values for motor analysis measurement items.
Specications
HIOKI PW8001A961-00