Hioki PW8001-01 User Manual

224
U7001 2.5MS/s Input Unit
• For voltages over 600 V, add the following values to the power phase angle accuracy:
0.1 Hz < f ≤ 500 Hz:
±
0.1
°
500 Hz < f ≤ 5 kHz:
±
0.3
°
5 kHz < f ≤ 20 kHz:
±
0.5
°
20 kHz < f ≤ 200 kHz:
±
1
°
• If measuring a voltage of 900 V or more, add the following value to the accuracy gures for voltage and active
power.
±
0.02% of reading
Even when the voltage input values decreases, the e󰀨ect of self-heating persists until the input resistance
temperature falls.
• If the DC voltage is between 1000 V (exclusive) and 1500 V (inclusive), add 0.045% of reading to accuracy
gures of voltage and e󰀨ective power. Values of the measurement accuracy are only designed values.
(When the DC voltage is between 1000 V (exclusive) and 1500 V (inclusive), accuracy for DC voltage and DC
e󰀨ective power is guaranteed after custom-ordered calibration made by Hioki.)
HIOKI PW8001A961-00

Hioki PW8001-01 Specifications

General

Brand	Hioki
Model	PW8001-01
Category	Measuring Instruments
Language	English