HP 262SA - Page 192

Block Data Transfer
Table
9-4. ENTER Key Block Transfer Summary (Continued)
TERMIN-
ATING
DATA
END
MODE CURSOR START AGENT
TRANSFERRED
CHAR
CURSOR END
EOL
Same as above
CR
Same
as above
(LF)
AutoTerm
NDT entered at
NDT
All ASCII chars
BT
Same
as above
(J) = YES
current cursor po-
and the following
CR
sition.
Then cur-
Ec sequences:
(LF)
sor moved to first
previous BT or
• Video enhance-
NDT. If none
ment
found, cursor is
• Alt char set
homed (left mar-
• Field definition
gin ignored).
If no data to be
transferred or cur-
sor is at end of
workspace when
transfer is in-
itiated, only uend
char" sent.
EOL
Same as above
CR Column
1. LF, if
(LF)
enabled.
If already an NDT
---
No data transmit-
BT Cursor doesn't
at current cursor
ted, only uend
CR
move.
position, cursor char".
(LF)
remains at cur-
rent position.
BLOCK LINE
Current cursor
BT
All ASCII chars.
BT Immediately
FORMAT posi tion if in an NDT
CR
following the
unprotected field,
(LF)
terminator.
AutoTerm
else start of next
(J) = NO
unprotected or
transmit-only
field.
EOF Same as above
CR
First column
(LF)
following end of
field.
9-14