HP 262SA - Page 194

Block Data Transfer
Table 9-4. ENTER Key Block Transfer Summary (Continued)
TERMIN-
ATING
DATA
END
MODE
CURSOR START AGENT
TRANSFERRED
CHAR
CURSOR
END
AutoTerm
Current
cursor NDT
Same
as above
BT
Same as above
(J)
= NO position.
EOW
Inh DC2
(H)
= NO
AutoTerm
An NDT entered NDT
Same as above
BT
Same as above
(J) = YES
at current cursor
position. Then,
cursor moved to
first previous BT
or NDT. Cursor
homed, if none
found (left margin
ignored).
If already an NDT
---
No data transmit-
BT Cursor doesn't
at current cursor
ted, only ttend
CR
move.
position.
char".
(LF)
BLOCK PAGE
Home up position.
BT
All ASCII chars in
BT Immediately
FORMAT
NDT unprotected and following the
transmi t-only
terminator.
AutoTerm
fields. Each field
(J)
= NO
transmitted as a
Inh DC2
separate block.
(H)
= YES
Each field, except
the last, is followed
by a field separa-
tor. The
last field is
followed by the
ttend char".
EOW If no unprotected
BT Same as above
or transmit-only
fields found, only
ttend char" sent.
9-16