HP 262SA - Page 223

Ec &p <x>p Su <z>C
Ec &p Su <z>C
Ec &p <x> W
<data string>
Ec &p W <data string>
Ec &k <x>S
Ec
Ec
{
Escape Codes
The action is selected by ((z", as shown below C(Su" selects the
Alternate Peripheral Interface network as the ((device").
z ACTION
1 Selects
((x" as the Alternate Peripheral Interface
address of the ((talk" device.
2 Selects
((x" as the Alternate Peripheral Interface
address of the ((listen" device
The action is selected by ((z", as shown below C(Su" selects the
Alternate Peripheral Interface network as the ((device").
z ACTION
3
Enable Alternate Peripheral Interface timeout.
4 Disable Alternate Peripheral Interface timeout.
Transfers ((x" bytes of the data string from the computer to the
selected destination device in binary form C(x" is a decimal
value in the range 1-256).
Transfers the data string, in ASCII form, from the computer to
the printer selected as the destination device. The string is
terminated either by the 256th byte or by an ASCII line feed
character.
Enables Expanded, Compressed, or Normal Character mode
for
the integral printer as designated by the character ((x".
x ACTION
o Disable both Expanded and Compressed Character
modes.
1
Initiate Expanded Character mode.
2
Initiate Compressed Character mode.
FORMAT MODE
Starts an unprotected field.
Starts a transmit-only field.
A-13