HP P2000 Reference Guide

316 XML API basetype properties
res2 string Shows whether internal debug messages are enabled for inclusion in the
Storage Controller debug log.
• Off: Disabled. This is the default.
• On: Enabled.
res2-numeric string Numeric equivalents for res2 values.
• 0: Off
• 1: On
capi2 string Shows whether Internal Configuration API tracing messages are enabled for
inclusion in the Storage Controller debug log.
• Off: Disabled. This is the default.
• On: Enabled.
capi2-numeric string Numeric equivalents for capi2 values.
• 0: Off
• 1: On
dms string Shows whether Snapshot feature debug messages are enabled for inclusion in
the Storage Controller debug log.
• Off: Disabled.
• On: Enabled. This is the default.
dms-numeric string Numeric equivalents for dms values.
• 0: Off
• 1: On
fruid string Shows whether FRU ID debug messages are enabled for inclusion in the Storage
Controller debug log.
• Off: Disabled.
• On: Enabled. This is the default.
fruid-numeric string Numeric equivalents for fruid values.
• 0: Off
• 1: On
resmgr string Shows whether Reservation Manager debug messages are enabled for inclusion
in the Storage Controller debug log.
• Off: Disabled. This is the default.
• On: Enabled.
resmgr-numeric string Numeric equivalents for resmgr values.
• 0: Off
• 1: On
init string Not used.
init-numeric string Not used.
ps string Not used.
ps-numeric string Not used.
hb string Not used.
hb-numeric string Not used.
Table 20 debug-log-parameters properties (continued)
Name Type Description

HP P2000 Specifications

General

Drive Support	SAS
Controller	Dual Controller options available
Host Interface	6Gb SAS, 8Gb FC, 1Gb iSCSI
RAID Levels	RAID 0, 1, 5, 6, 10
Storage Type	SSD
Hot-swappable Components	Drives, controllers, power supplies, fans
Dimensions	8.9 x 44.8 x 63.5 cm (3.5 x 17.6 x 25 inches)
Drive Bays	Up to 12 LFF or 24 SFF drive bays per enclosure