420 XML API basetype properties
cache-flush-
period
uint32 Not used.
read-ahead-
enabled
string
Not used.
read-ahead-
enabled-numeric
string
Not used.
write-back-
enabled
string
Not used.
write-back-
enabled-numeric
string Not used.
number-of-reads uint32 Number of read operations since these statistics were last reset or since the
controller was restarted.
number-of-
writes
uint32 Number of write operations since these statistics were last reset or since the
controller was restarted.
total-sectors-
read
uint32 Total sectors read.
total-sectors-
written
uint32 Total sectors written.
job-running string Same as current-job.
current-job string Job running on the vdisk, if any.
• (blank): No job is running.
• DRSC: Disks in the vdisk are being scrubbed.
• EXPD: Vdisk is being expanded.
• INIT: Vdisk is initializing.
• RCON: Vdisk is being reconstructed.
• VRFY: Vdisk is being verified.
• VRSC: Vdisk is being scrubbed.
current-job-
numeric
string Numeric equivalents for current-job values.
• 0: (blank)
• 2: INIT
• 3: RCON
• 4: VRFY
• 5: EXPD
• 6: VRSC
• 7: DRSC
current-job-
completion
string • 0%–99%: Percent complete of running job.
• (blank): No job is running (job has completed).
target-id uint32 Not used.
num-array-
partitions
uint32 Number of volumes in the vdisk.
largest-free-
partition-space
string The largest contiguous space in which a volume can be created. The value is
formatted to use the current base, precision, and units.
largest-free-
partition-
space-numeric
string Unformatted largest-free-partition-space value in 512-byte blocks.
Table 83 virtual-disks properties (continued)
Name Type Description
To Next Page
Loading...
