HP ProCurve 530 NA (J8986A)

7-31
Wireless Security Configuration
Manual Configuration Using the CLI
The following commands configure the built-in authentication server and
authentications to the best security combination using the WPA Enterprise
mode and the AES protocol.
Note Supported authentication servers are the built-in authentication server on the
access point or an external RADIUS server. Use of the built-in server automat-
ically establishes the RADIUS key.
ProCurve Access Point 530# configure
ProCurve Access Point 530(config)# radio 1
ProCurve Access Point 530(radio1)# wlan 1
ProCurve Access Point 530(radio1-wlan1)#radius primary ip
192.168.1.52
ProCurve Access Point 530(radio1-wlan1)#radius primary port
161
ProCurve Access Point 530(radio1-wlan1)#
radius primary key
secret
ProCurve Access Point 530(radio1-wlan1)#