EasyManuals Logo

HPE FlexNetwork 5130 EI Series User Manual

HPE FlexNetwork 5130 EI Series
314 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #119 background imageLoading...
Page #119 background image
111
slot slot-number: Specifies an IRF member device by its member ID. If you do not specify a
member device, this command displays information for all member devices.
Usage guidelines
In STP or RSTP mode, the command output is sorted by port name.
• If you do not specify a port, this command applies to all ports.
• If you specify a port list, this command applies to the specified ports.
In PVST mode, the command output is sorted by VLAN ID and by port name in each VLAN.
• If you do not specify a VLAN or port, this command applies to all ports in all VLANs.
• If you only specify a VLAN list but not a port, this command applies to all ports in the specified
VLANs.
• If you only specify a port list but not a VLAN, this command applies to the specified ports in all
VLANs.
• If you specify both a VLAN list and a port list, this command applies to the ports in the specified
VLANs.
In MSTP mode, the command output is sorted by MSTI ID and by port name in each MSTI.
• If you do not specify an MSTI or port, this command applies to all MSTIs on all ports.
• If you specify an MSTI list but not a port, this command applies to all ports in the specified
MSTIs.
• If you specify a port list but not an MSTI, this command applies to all MSTIs on the specified
ports.
• If you specify both an MSTI list and a port list, this command applies to the specified ports in the
specified MSTIs.
Examples
# In MSTP mode, display the brief spanning tree status and statistics for MSTI 0 on port
GigabitEthernet 1/0/1.
<Sysname> display stp instance 0 interface GigabitEthernet 1/0/1 brief
MST ID Port Role STP State Protection
0 GigabitEthernet1/0/1 ALTE DISCARDING LOOP
# In PVST mode, display the brief spanning tree status and statistics for VLAN 2 on port
GigabitEthernet 1/0/1.
<Sysname> system-view
[Sysname] stp mode pvst
[Sysname] display stp vlan 2 interface gigabitethernet 1/0/1 brief
VLAN ID Port Role STP State Protection
2 GigabitEthernet1/0/1 ALTE DISCARDING LOOP
Table 25 Command output
Field Description
MST ID MSTI ID in the MST region.
Port Port name, corresponding to each MSTI or VLAN.

Table of Contents

Other manuals for HPE FlexNetwork 5130 EI Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HPE FlexNetwork 5130 EI Series and is the answer not in the manual?

HPE FlexNetwork 5130 EI Series Specifications

General IconGeneral
BrandHPE
ModelFlexNetwork 5130 EI Series
CategorySwitch
LanguageEnglish

Related product manuals