215
{ If the hybrid port has been a tagged or untagged member of part of the primary VLANs and
their associated secondary VLANs, this member attribute remains in these VLANs. The
device assigns the hybrid port to the rest of the primary VLANs and their associated
secondary VLANs as a tagged member.
{ If the hybrid port does not allow any of the primary VLANs and their associated secondary
VLANs, the device assigns the port to these VLANs as a tagged member.
The
undo form of this command does not change the VLAN attributes (allowed secondary VLANs,
port link type, and PVID) of the port.
If you execute the
undo form of this command on a trunk promiscuous port, the command removes
the port from the VLANs specified by the
vlan-id-list argument.
You can configure the specified VLANs as primary VLANs before or after you execute this command.
This command is mutually exclusive with the
port private-vlan host, port private-vlan
promiscuous
and port private-vlan trunk secondary commands.
For an uplink port to permit multiple primary VLANs, use the
port private-vlan trunk
promiscuous
command to assign the port to these VLANs. The port can then transmit packets
from these primary VLANs with VLAN tags. For an uplink port to permit only one primary VLAN, use
the
port private-vlan promiscuous command to assign the port to the VLAN. The port can
then transmit packets from the primary VLAN without VLAN tags.
Examples
In this example, VLANs 2 and 3 are primary VLANs. VLAN 2 is associated with secondary VLAN 20.
VLAN 3 is associated with secondary VLAN 30.
# Display information about GigabitEthernet 1/0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] display this
#
interface GigabitEthernet1/0/1
port link-mode bridge
#
return
# Configure GigabitEthernet 1/0/1 as a trunk promiscuous port of VLANs 2 and 3, and then verify the
configuration.
[Sysname-GigabitEthernet1/0/1] port private-vlan 2 3 trunk promiscuous
[Sysname-GigabitEthernet1/0/1] display this
#
interface GigabitEthernet1/0/1
port link-mode bridge
port link-type hybrid
port private-vlan 2 3 trunk promiscuous
port hybrid vlan 2 3 20 30 tagged
port hybrid vlan 1 untagged
#
return
The output shows that:
• GigabitEthernet 1/0/1 is a trunk promiscuous port of VLANs 2 and 3.
• GigabitEthernet1/0/1 is a tagged member of VLANs 2, 3, 20, and 30.
• The port link type of GigabitEthernet 1/0/1 is hybrid.
To Next Page
Loading...
Need help?
General