HPE FlexNetwork 5130 EI Series User Manual

237
Syntax
display mvrp statistics [ interface interface-list ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface interface-list: Specifies a range of Ethernet interfaces in the form of
interface-type interface-number1 [ to interface-type interface-number2 ].
The
interface-type interface-number argument represents the interface type and
interface number. The value for the
interface-number2 argument must be greater than or equal
to the value for the
interface-number1 argument. If you do not specify this option, the
command displays MVRP statistics of all MVRP-enabled ports.
Usage guidelines
If MVRP is disabled on the specified ports, this command does not provide any output.
Examples
# Display MVRP statistics of all ports.
<Sysname> display mvrp statistics
----[GigabitEthernet1/0/1]----
Failed Registrations : 1
Last PDU Origin : 000f-e200-0010
Frames Received : 201
New Event Received : 0
JoinIn Event Received : 1167
In Event Received : 0
JoinMt Event Received : 22387
Mt Event Received : 31
Leave Event Received : 210
LeaveAll Event Received : 63
Frames Transmitted : 120
New Event Transmitted : 0
JoinIn Event Transmitted : 311
In Event Transmitted : 0
JoinMt Event Transmitted : 873
Mt Event Transmitted : 11065
Leave Event Transmitted : 167
LeaveAll Event Transmitted : 4
Frames Discarded : 0
----[GigabitEthernet1/0/2]----
Failed Registrations : 0
Last PDU Origin : 0000-0000-0000
Frames Received : 0
New Event Received : 0

HPE FlexNetwork 5130 EI Series Specifications

General

Brand	HPE
Model	FlexNetwork 5130 EI Series
Category	Switch
Language	English