HPE FlexNetwork 5130 EI Series User Manual

264
Management address interface ID : Unknown
Management address OID : 0
Port VLAN ID(PVID): 1
Link aggregation supported : Yes
Link aggregation enabled : Yes
Aggregation port ID : 52
Auto-negotiation supported : Yes
Auto-negotiation enabled : Yes
OperMau : Speed(1000)/Duplex(Full)
Power port class : PD
PSE power supported : Yes
PSE power enabled : Yes
PSE pairs control ability : Yes
Power pairs : Signal
Port power classification : Class 0
Power type : Type 2 PD
Power source : PSE and local
Power priority : High
PD requested power value : 21.1 w
PSE allocated power value : 15.3 w
Maximum frame size : 12288
# Display the brief LLDP information that all LLDP agents on all ports received from the neighboring
devices.
<Sysname> display lldp neighbor-information
LLDP neighbor-information of port 52[GigabitEthernet1/0/3]:
LLDP agent nearest-bridge:
LLDP neighbor index : 3
ChassisID/subtype : 0011-2233-4400/MAC address
PortID/subtype : 000c-29f5-c71f/MAC address
Capabilities : Bridge, Router, Customer Bridge
LLDP neighbor index : 6
ChassisID/subtype : 0011-2233-4400/MAC address
PortID/subtype : 000c-29f5-c715/MAC address
Capabilities : None
CDP neighbor-information of port 52[GigabitEthernet1/0/3]:
LLDP agent nearest-bridge:
CDP neighbor index : 4
Chassis ID : SEP00260B5C0548
Port ID : Port 1
CDP neighbor index : 5
Chassis ID : 0011-2233-4400
Port ID : GigabitEthernet1/0/4
LLDP neighbor-information of port 52[GigabitEthernet1/0/3]:
LLDP agent nearest-nontpmr:

HPE FlexNetwork 5130 EI Series Specifications

General

Brand	HPE
Model	FlexNetwork 5130 EI Series
Category	Switch
Language	English