HPE FlexNetwork 5130 EI Series User Manual

266
Field Description
System capabilities supported
Capabilities supported on the neighboring device:
• Repeater—Signal repeating is supported.
• Bridge—Switching is supported.
• Router—Routing is supported.
• Telephone—The neighboring device can act as a telephone.
• DocsisCableDevice—The neighboring device can act as a
DOCSIS-compliant cable device.
• StationOnly—The neighboring device can act as a station
only.
• Customer Bridge—The customer bridge feature is enabled.
• Service Bridge—The service bridge feature is enabled.
• TPMR—The TPMR feature is enabled.
• Other—Features other than those listed above are
supported.
System capabilities enabled
Capabilities enabled on the neighboring device:
• Repeater—Signal repeating is enabled.
• Bridge—Switching is enabled.
• Router—Routing is enabled.
• Telephone—The neighboring device is acting as a
telephone.
• DocsisCableDevice—The neighboring device is acting as a
DOCSIS-compliant cable device.
• StationOnly—The neighboring device is acting as a station
only.
• Customer Bridge—The customer bridge feature is enabled.
• Service Bridge—The service bridge feature is enabled.
• TPMR—The TPMR feature is enabled.
• Other—Features other than those listed above are
supported.
Management address OID Management address object ID.
Link aggregation supported Indicates whether link aggregation is supported.
Link aggregation enabled Indicates whether link aggregation is enabled.
Aggregation port ID Member port ID, which is 0 when link aggregation is disabled.
Auto-negotiation supported Indicates whether autonegotiation is supported on the port.
Auto-negotiation enabled Indicates whether autonegotiation is enabled on the port.
OperMau Speed and duplex state on the port.
Power port class
PoE port class:
• PSE—Power sourcing equipment.
• PD—Powered device.
PSE power supported Indicates whether the device can operate as a PSE.
PSE power enabled Indicates whether the device is operating as a PSE.
PSE pairs control ability Indicates whether the pair selection ability is available.
Power pairs
Power supply mode:
• Signal—Uses data pairs to supply power.
• Spare—Uses spare pairs to supply power.

HPE FlexNetwork 5130 EI Series Specifications

General

Brand	HPE
Model	FlexNetwork 5130 EI Series
Category	Switch
Language	English