HPE FlexNetwork 5130 EI Series User Manual

275
Power via MDI TLV NO NO
Maximum Frame Size TLV NO NO
LLDP-MED extend TLV:
Capabilities TLV NO NO
Network Policy TLV NO NO
Location Identification TLV NO NO
Extended Power via MDI TLV NO NO
Inventory TLV NO NO
Table 60 Command output
Field Description
LLDP tlv-config of port 1 Advertisable optional TLVs of port 1.
NAME TLV type.
STATUS Indicates whether the type of TLV is sent through a port.
DEFAULT Indicates whether the type of TLV is sent through a port by default.
Basic optional TLV
Basic optional TLVs:
• Port Description TLV.
• System Name TLV.
• System Description TLV.
• System Capabilities TLV.
• Management Address TLV.
IEEE 802.1 extended TLV
IEEE 802.1 organizationally specific TLVs:
• Port VLAN ID TLV.
• Port and protocol VLAN ID TLV.
• VLAN name TLV.
• DCBX TLV.
• EVB TLV.
• Management VID TLV.
IEEE 802.3 extended TLV
IEEE 802.3 organizationally specific TLVs:
• MAC-Physic TLV.
• Power via MDI TLV.
• Link aggregation TLV.
• Maximum frame size TLV.
LLDP-MED extend TLV
LLDP-MED TLVs:
• Capabilities TLV.
• Network Policy TLV.
• Extended Power-via-MDI TLV.
• Location Identification TLV.
• Inventory TLV.
Inventory TLV
Inventory TLVs:
• Hardware Revision TLV.
• Firmware Revision TLV.
• Software Revision TLV.
• Serial Number TLV.
• Manufacturer Name TLV.
• Model name TLV.
• Asset ID TLV.

HPE FlexNetwork 5130 EI Series Specifications

General

Brand	HPE
Model	FlexNetwork 5130 EI Series
Category	Switch
Language	English