6.1.6 Loading the NetEco Software License
The NetEco license le is used to control the functions and management
capabilities of the NetEco. Before using NetEco, you need to load a commercial
license.
Prerequisites
● You have obtained a license.
● You have logged in to the NetEco client using a web browser.
Procedure
Step 1 Click Import License le when you log in to the NetEco at the rst time.
Step 2 Click
next to the License text box and select a license le.
Step 3 Click Upload.
The information about the imported license le is displayed.
Step 4 Click Apply.
----End
6.1.7 Installing NE Adapters
Install the NE adapters on the NetEco.
Prerequisites
You have obtained the adapter software installation packages.
Procedure
1. Choose Device Management >
Conguration > Device Integration.
2. In the navigation tree on the left, choose Adapter Management and click
Upload.
3. On the page that is displayed, click + to select the
le to be uploaded.
4. Click Upload to upload the
les.
5. Select the NE adapter packages to be installed on the Adapter Management
page, and click Install. Then, click Yes in the displayed dialog box.
The time required for the installation is related to the number of adapters.
Wait for the installation to complete.
6.1.8 Adding a Management Domain
6.1.8.1 General Operation: Adding a Management Domain
This section describes how to create a management domain.
iMaster NetEco
Device Installation and Commissioning Guide (Data
Center) 6 Adding Devices
Issue 02 (2021-05-12) Copyright © Huawei Technologies Co., Ltd. 142
To Next Page
Loading...
Need help?
General
