Huawei iMaster NetEco V600R021C10 - Installing a Hydrogen Sensor

Figure 3-18 Installing temperature sensors
(1) Fastener
----End
3.7.2 Installing a Hydrogen Sensor
Context
● A hydrogen sensor is used to detect the hydrogen density indoors. It works
with the hydrogen detection system.
● The hydrogen detection system is installed on the ceiling of the area to be
detected.
iMaster NetEco
Device Installation and Commissioning Guide (Data
Center) 3 Installing Devices
Issue 02 (2021-05-12) Copyright © Huawei Technologies Co., Ltd. 29