Huawei iMaster NetEco V600R021C10 - Routine Maintenance for the Single-Door;Double-Door Magnetic Lock; Routine Maintenance for the Emergency Door Release Button; Parts Replacement; Parts Replacement for the ECC800-Pro

7.1.2.8 Routine maintenance for the single-door/double-door magnetic lock
Table 7-16 Routine maintenance for the single-door/double-door magnetic lock
Item Maintenanc
e Interval
Method Expected
Result
Exception
Handling
Functions of
the single-
door/double-
door magnetic
lock
Semi-
annually
Check
whether the
magnetic lock
attracts and
separates
properly when
being
powered on
and
o
respectively.
The magnetic
lock attracts
and separates
properly.
If the
magnetic
lock fails to
attract or
separate
properly,
replace the
lock.
7.1.2.9 Routine maintenance for the emergency door release button
Table 7-17 Routine maintenance for the emergency door release button
Item
Maintenan
ce Interval
Method Expected
Result
Troubleshooti
ng
Emergency
door release
button
function
Semi-
annually
Check whether
the glass plate
for the
emergency door
release button is
intact.
The glass
plate for the
emergency
door release
button is
intact.
If the
emergency
door release
button is
broken, replace
the button.
7.2 Parts Replacement
7.2.1 Parts Replacement for the ECC800-Pro
7.2.1.1 Replacing an ECC800-Pro Main Control Module
Prerequisites
NO TICE
● The ECC800-Pro main control module is hot-swappable.
● Before disconnecting cables from the ECC800-Pro main control module, label
the cables based on the corresponding ports.
iMaster NetEco
Device Installation and Commissioning Guide (Data
Center) 7 Device Maintenance
Issue 02 (2021-05-12) Copyright © Huawei Technologies Co., Ltd. 285