Huawei iMaster NetEco V600R021C10 User Manual

Related Tasks
● Exporting conguration parameters
Choose Export > Conguration Parameters, export the conguration
parameter form, and modify conguration parameters.
Figure 6-10 Exporting conguration parameters
● Exporting algorithm parameters
Choose Export > Algorithm Parameters, and export the algorithm parameter
form.
6.2.3.3 Viewing iCooling Energy
Eciency on the NetEco
On the overview page, you can view the PUE, accumulated energy consumption,
and running overview of the data center. After the iCooling function is enabled,
the system displays the running information in energy saving mode.
Prerequisites
● You have created a management domain on the Planning
Conguration
page.
● You have added the ChillerPlantControl device to the management domain.
● You have installed the iCooling energy
eciency management license and
obtained the iCooling energy
eciency management permission.
● You have congured power and cooling capacity counters on the PUE
Conguration page. For details, see "Conguring PUE Counters" in iMaster
NetEco Product Documentation (DC) (V600R021C10_xx) .
Procedure
Step 1 Log in to the NetEco client.
Step 2 Choose Energy Eciency Management > Energy Saving Management >
iCooling.
Step 3 Select the required management domain from the drop-down list in the upper-
right corner of the page.
Step 4 View Overall Running Status, PUE(Hours), Energy Saving and Total Consumed
Energy, and Running Overview.
iMaster NetEco
Device Installation and Commissioning Guide (Data
Center) 6 Adding Devices
Issue 02 (2021-05-12) Copyright © Huawei Technologies Co., Ltd. 154

Huawei iMaster NetEco V600R021C10 Specifications

General

Brand	Huawei
Model	iMaster NetEco V600R021C10
Category	Network Hardware
Language	English