3. Set Multi-point logins to a value greater than 2.
4. On the User List page, click Permission Settings next to the new user. You
can select Enable All Device View Rights or select the cameras to be
browsed and queried, obtain the documents delivered with the device or by
referring to the "Reference Documentation" section, set other parameters,
and click Save.
----End
6.4.2.3.2 Setting Parameters on the iClient
Prerequisites
The network communication between the IVS1800 and the camera is normal.
Procedure
Step 1 Install the iClient.
1. Download the iClient.
You can obtain the iClient in either of the following ways:
Method 1: Obtain the iClient installation program from the OMU portal.
Log in to the OMU portal, click Client Download in the
upper right corner, and save the installation program to a local
directory.
Method 2
1. Log in to the OMU portal, choose Local Conguration >
Basic Conguration, and view Current version.
2. Log in to https://support.huawei.com/enterprise/, and search
for and choose iClient. In the search result, click the
Software Download tab, click the version and patch number
corresponding to the current version, and download the
software package as required.
Figure 6-30 iClient software package search result
iMaster NetEco
Device Installation and Commissioning Guide (Data
Center) 6 Adding Devices
Issue 02 (2021-05-12) Copyright © Huawei Technologies Co., Ltd. 179
To Next Page
Loading...
Need help?
General
