Operation Description
Deleting a
container
You can delete one container or multiple containers in
batches on the current page.
NOTE
If a container contains subdevices, you cannot delete it. You can
delete the container only after you delete subdevices in the
container.
● Delete one container.
1. Select a container and click Delete under .
2. In the displayed
Conrm dialog box, click Yes.
● Delete multiple containers in batches.
1. Click
on the toolbar.
2. Add
lter conditions, select multiple containers, and
click Delete.
3. In the displayed
Conrm dialog box, click Yes.
6.1.9 Adding Devices
This section describes the process of adding devices.
Prerequisites
You have the operation rights for Planning
Conguration.
Procedure
1. Log in to the NetEco client.
2. On the main menu, choose Device Management >
Conguration >
Planning Conguration.
3. In area 1, select the management domain to which the device to be added
belongs.
4. In area 2, click the Device tab, select a device type from the drop-down list
box, and select the device to be added.
5. Drag the selected device icon to area 3.
iMaster NetEco
Device Installation and Commissioning Guide (Data
Center) 6 Adding Devices
Issue 02 (2021-05-12) Copyright © Huawei Technologies Co., Ltd. 147
To Next Page
Loading...
Need help?
General
