Huawei iMaster NetEco V600R021C10 - Configuring Camera Parameters on the Neteco

Figure 6-37 Server Recording Plan
4. Congure a server recording plan.
NO TE
If you set the recording plan policy to All, you do not need to set the recording plan time.
5. Click Save.
----End
6.4.2.4 Conguring Camera Parameters on the NetEco
This section describes how to set video parameters on the NetEco parameter
setting page.
Prerequisites
● You have the video management permission.
● Use Google Chrome or Mozilla Firefox of the latest version to play videos.
● Chrome or
refox is available for video playing
● Video streaming media service has been enabled on the System > System
Setting > System
Conguration > Protocols Conguration > NetEco
Protocols page. If the service is disabled, enable it by following the
instructions provided in
"Conguring Protocol Switch" in iMaster NetEco
Product Documentation (DC) (V600R021C10_xx) .
Procedure
Step 1 Log in to the NetEco client.
Step 2 Choose Maintenance Management > Security Protection > Camera
Management from the main menu.
Step 3 In the navigation tree on the left, choose Video Surveillance Subsystem.
Step 4 Click Create on the right of the page. The Creating a Video Subsystem dialog
box is displayed.
iMaster NetEco
Device Installation and Commissioning Guide (Data
Center) 6 Adding Devices
Issue 02 (2021-05-12) Copyright © Huawei Technologies Co., Ltd. 184