3.8.2 Installing a C3220 Camera
Prerequisites
● Control skylights have been installed.
● A camera and tools for installing it have been prepared.
● A network cable for connecting the camera to the LAN switch has been
prepared.
● The LAN switch has been normally powered on.
Context
The camera needs to be installed on a control skylight.
Preparations
Tool: Phillips screwdriver
Materials: SD card, camera
Procedure
Step 1 Install an SD card.
1. Remove the transparent cover using a Phillips screwdriver.
Figure 3-50 Removing the transparent cover
2. Gently insert the SD card into the SD card slot.
iMaster NetEco
Device Installation and Commissioning Guide (Data
Center) 3 Installing Devices
Issue 02 (2021-05-12) Copyright © Huawei Technologies Co., Ltd. 48
To Next Page
Loading...
Need help?
General
