Huawei iMaster NetEco V600R021C10 - Installing a 2288 X V5 Server

Figure 3-5 Installing a server
Step 4 Connect the server power cables to the PDU.
WARNING
Wear an ESD wrist strap when connecting power cables.
NO TE
The server uses dual power supplies. Connect the two power cables to dierent PDUs.
----End
3.2.2 Installing a 2288X V5 Server
Context
Tool: Phillips screwdriver
Materials: 2288X V5 server, guide rail, rubber plug, screw
Procedure
Step 1 Install guide rails.
iMaster NetEco
Device Installation and Commissioning Guide (Data
Center) 3 Installing Devices
Issue 02 (2021-05-12) Copyright © Huawei Technologies Co., Ltd. 20