Huawei iMaster NetEco V600R021C10 - Page 155

Prerequisites
You have created management domains in Planning Conguration.
Procedure
Step 1 Log in to the NetEco client.
Step 2 On the main menu, choose Device Management >
Conguration > Planning
Conguration.
Step 3 Choose the management domain where you want to add a smart module from
the navigation tree on the left.
Step 4 In the Domain area on the lower left of the page, select Modular from the drop-
down list box.
Step 5 Select the Modular to be added and drag the modular icon to the management
domain area.
Figure 6-3 Adding the smart module in the room area
Step 6 Modify Management Info of the smart module as required or retain the default
values.
Step 7 Click
on the toolbar to save the settings.
----End
Follow-up Procedure
Perform the following operations on the Planning Conguration page as
required.
iMaster NetEco
Device Installation and Commissioning Guide (Data
Center) 6 Adding Devices
Issue 02 (2021-05-12) Copyright © Huawei Technologies Co., Ltd. 144