Table 6-2 SMS modem parameters
Parameter Description Example
Network system of SMS
modem
The options are GSM,
CDMA, LTE and FDDLTE.
The default value is
CDMA.
● The following GSM
SMS modems are
supported: E-TEK GSM
modem TD-8011, E-
TEK GSM modem
TD-8013, and
wavecom WMOD2B
GSM/GPRS modem.
● The following CDMA
SMS modems are
supported: E-TEK
CDMA modem
TD-8022R and E-TEK
CDMA modem
TD-8022.
● The following LTE and
FDDLTE SMS modems
are supported: E-TEK
TD-8412 modem.
CDMA
Serial port for
connecting SMS modem
Serial port connections
are secure hardware-
level connections. The
options are COM1 and
COM2. By default, this
parameter is left blank.
COM1
SMS modem bound rate Baud rate of the SMS
modem serial port. The
default value is 9600.
115200
Mobile number for
receiving notication
A country code must be
added before a mobile
number. For example,
the country code of
China is 86, and the
format of the mobile
number is as follows:
86+
mobile number
. The
recipient mobile number
is used only for testing.
When this parameter is
left blank, the test
button is unavailable.
8613111111111
iMaster NetEco
Device Installation and Commissioning Guide (Data
Center) 6 Adding Devices
Issue 02 (2021-05-12) Copyright © Huawei Technologies Co., Ltd. 157
To Next Page
Loading...
Need help?
General
