EasyManuals Logo

Huawei iMaster NetEco V600R021C10 User Manual

Huawei iMaster NetEco V600R021C10
340 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #184 background imageLoading...
Page #184 background image
Parameter Description
Encoding
protocol
Set the coding protocol based on the site requirements.
The options are as follows:
– H.264: The H.264 protocol requires relatively small
bandwidth to ensure video quality.
– MJPEG: The MJPEG protocol decodes and displays
each frame independently without referring to the
previous and next frames. This protocol has a small
compression ratio and requires large bandwidth to
ensure video quality. This protocol is suitable for
video editing.
– H.265: The H.265 protocol is bandwidth-conserving
compared with the H.264 protocol.
Encoding
complexity
The options of H.264 proles include Base prole, Main
prole, and High prole. Among these proles, the
baseline prole has the lowest encoding compression
performance and lowest requirements on hardware
decoding performance, while the high prole has the
highest.
Resolution A higher resolution indicates clearer images and higher
bandwidth consumption.
Bit rate type This parameter is available only when you set Encoding
protocol to H.264 or H.265.
The bit rate is measured by data bits transmitted in a
unit of time.
– Variable bit rate: The bit rate varies depending on
the image complexity to ensure the clarity of images
with great dynamic changes. The bit rate is low if the
image is simple or static. The variable bit rate is
recommended.
– Constant bit rate: The constant bit rate remains the
same. The upper limit of the instantaneous bit rate is
set to 110%. If the bit rate is incorrectly
congured
for images with great dynamic changes, the images
will be unclear.
Max. bit rate This parameter is available only when you set Bit rate
type to Variable bit rate.
The bit rate range depends on the selected resolution.
Bit rate value Average bit rate when Bit rate type is set to Constant
bit rate.
The bit rate range depends on the selected resolution.
iMaster NetEco
Device Installation and Commissioning Guide (Data
Center) 6 Adding Devices
Issue 02 (2021-05-12) Copyright © Huawei Technologies Co., Ltd. 173

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Huawei iMaster NetEco V600R021C10 and is the answer not in the manual?

Huawei iMaster NetEco V600R021C10 Specifications

General IconGeneral
BrandHuawei
ModeliMaster NetEco V600R021C10
CategoryNetwork Hardware
LanguageEnglish

Related product manuals