Huawei iMaster NetEco V600R021C10 User Manual

Parameter Description
Connection Mode Indicates the connection mode of a device. You can set this
parameter to Non-SSL Connection or SSL Connection.
If you modify the connection mode on the NetEco, you
must modify the connection mode on the device WebUI
accordingly.
NOTE
● Connection Mode for the NetEco and device must be the same.
● By default, Connection Mode is set to SSL Connection for the
NetEco and device.
● A non-SSL connection has security risks. You are advised to
select the secure SSL connection.
Authentication
password
Indicates the re-authentication password for the NetEco
and device.
1. Click Modify.
NOTE
After the device is saved, the Modify button is displayed.
2. In the displayed dialog box, enter the New Password
and
Conrm Password.
NOTE
– The default re-authentication password for the NetEco and
device is Modifyme_123.
– The device password should be consistent with the NetEco
password.
– If the password does not meet requirements, modify it on
the device.
3. Select a value for Send To Device.
NOTE
If you select YES, the re-authentication password for the NetEco
and device is changed at the same time. If you select NO, only
the re-authentication password of NetEco is changed on the
server.
4. Click OK.
Timeout Period
Timeout duration for a connection test. The default value is
3s.
Table 6-16 SNMPv1/v2 device parameter description
Parameter
Description
Managed Object
Name
Device name
IP Set this parameter to the device IP address.
Port Set this parameter to the port number of the device. (set to
161 by default)
iMaster NetEco
Device Installation and Commissioning Guide (Data
Center) 6 Adding Devices
Issue 02 (2021-05-12) Copyright © Huawei Technologies Co., Ltd. 211

Huawei iMaster NetEco V600R021C10 Specifications

General

Brand	Huawei
Model	iMaster NetEco V600R021C10
Category	Network Hardware
Language	English