Huawei Quidway S9300

Readview: ViewDefault
Writeview: <no specified>
Notifyview :<no specified>
Storage-type: nonVolatile
Group name: test2
Security model: v3 noAuthnoPriv
Readview: b
Writeview: b
Notifyview :b
Storage-type: nonVolatile
Group name: test2
Security model: v3 AuthPriv
Readview: ViewDefault
Writeview: <no specified>
Notifyview :<no specified>
Storage-type: nonvolatile
# View information about the user.
<Switch> display snmp-agent usm-user
User name: NMS1
Engine ID: 000007DB7F000001000041BB active
User name: NMS2
Engine ID: 000007DB7F000001000041BB active
# Display the MIB view.
<Switch> display snmp-agent mib-view
View name:b
MIB Subtree:interfaces
Subtree mask:
Storage-type: nonVolatile
View Type:included
View status:active
View name:ViewDefault
MIB Subtree:internet
Subtree mask:
Storage-type: nonVolatile
View Type:included
View status:active
View name:ViewDefault
MIB Subtree:snmpUsmMIB
Subtree mask:
Storage-type: nonVolatile
View Type:excluded
View status:active
View name:ViewDefault
MIB Subtree:snmpVacmMIB
Subtree mask:
Storage-type: nonVolatile
View Type:excluded
View status:active
View name:ViewDefault
MIB Subtree:snmpModules.18
Subtree mask:
Storage-type: nonVolatile
View Type:excluded
View status:active
# When a trap is generated, you can run the display trapbuffer command to view details about
the trap.
[Switch] display trapbuffer
Trapping buffer configuration and contents : enabled
Allowed max buffer size : 1024
Actual buffer size : 256
Channel number : 3 , Channel name : trapbuffer
Dropped messages : 0
Quidway S9300 Terabit Routing Switch
Configuration Guide - Network Management 1 SNMP Configuration
Issue 03 (2010-09-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1-81