Huawei Quidway S9300

HIdx - hlHostControlIndex
PIdx - ProtocolDirLocalIndex
Addr - nlHostAddress
InPkts - nlHostInPkts
OutPkts - nlHostOutPkts
InOctes - nlHostInOctets
OutOctes - nlHostOutOctets
OutMac - nlHostOutMacNonUnicastPkts
ChgTm - nlHostTimeMark
CrtTm - nlHostCreateTime
HIdx PIdx Addr InPkts OutPkts InOctes OutOctes OutMac ChgTm CrtTm
123 1 10.1.1.1 0 78 0 10046 78 81489 40859
# Display the hlHostControlTable. You can view the number of added or deleted host entries
on the interface and the maximum number of entries in the nlHostTable.
<Quidway> display rmon2 hlhostcontroltable
Abbreviation:
index - hlhostcontrolindex
datasource - hlhostcontroldatasource
droppedfrm - hlhostcontrolnldroppedframes
inserts - hlhostcontrolnlinserts
Deletes - hlHostControlNlDeletes
maxentries - hlhostcontrolnlmaxdesiredentries
owner - hlhostcontrolowner
status - hlhostcontrolstatus
index datasource droppedfrm inserts eletes maxentries owner status
123 Vlanif10 0 19 0 100 China active
----End
Configuration Files
#
sysname Quidway
#
vlan batch 10
#
interface Vlanif10
ip address 10.1.1.1 255.255.255.0
#
interface GigabitEthernet2/0/0
port hybrid pvid vlan 10
port hybrid untagged vlan 10
#
rmon2 protocoldirtable protocoldirid 8.0.0.0.1.0.0.8.0 parameter 2.0.0 descr ip
host supportedon owner china status active
rmon2 hlhostcontroltable index 123 datasource interface vlanif10 maxentry 100 owner
china status active
#
return
2 RMON and RMON2 Configuration
Quidway S9300 Terabit Routing Switch
Configuration Guide - Network Management
2-22 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 03 (2010-09-20)