Huawei Quidway S9300

#
ospf 1
area 0.0.0.0
network 2.2.2.0 0.0.0.255
#
ntp-service authentication enable
ntp-service authentication-keyid 42 authentication-mode md5 %@ENC;8HX
\#Q=^Q`MAF4<1!!
ntp-service reliable authentication-keyid 42
ntp-service refclock-master 2
#
return
l Configuration file of Switch B
#
sysname SwitchB
#
vlan batch 110 111
#
interface Vlanif110
ip address 1.0.1.11 255.255.255.0
#
interface Vlanif111
ip address 10.0.0.1 255.255.255.0
#
interface GigabitEthernet1/0/0
port hybrid pvid vlan 111
port hybrid untagged vlan 111
#
interface GigabitEthernet2/0/0
port hybrid pvid vlan 110
port hybrid untagged vlan 110
ospf 1
area 0.0.0.0
network 1.0.1.0 0.0.0.255
network 10.0.0.0 0.0.0.255
#
ntp-service authentication enable
ntp-service authentication-keyid 42 authentication-mode md5 %@ENC;8HX
\#Q=^Q`MAF4<1!!
ntp-service reliable authentication-keyid 42
ntp-service unicast-server 2.2.2.2 authentication-keyid 42
#
return
l Configuration file of Switch C
#
sysname SwitchC
#
vlan batch 111
#
interface Vlanif111
ip address 10.0.0.2 255.255.255.0
#
interface GigabitEthernet1/0/0
port hybrid pvid vlan 111
port hybrid untagged vlan 111
#
ntp-service authentication enable
ntp-service authentication-keyid 42 authentication-mode md5 %@ENC;8HX
\#Q=^Q`MAF4<1!!
ntp-service reliable authentication-keyid 42
ntp-service unicast-server 10.0.0.1 authentication-keyid 42
#
return
l Configuration file of Switch D
#
sysname SwitchD
Quidway S9300 Terabit Routing Switch
Configuration Guide - Network Management 3 NTP Configuration
Issue 03 (2010-09-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3-25