Huawei Quidway S9300

VLAN tagged :No
Media policy VlanID :0
Media policy L2 priority :0
Media policy Dscp :0
Power Type :Unknown
PoE PSE power source :Unknown
Port PSE Priority :Unknown
Port Available power value:0
l Check the configuration of Switch B.
See the procedure for checking the configuration of Switch A.
----End
Configuration Files
l Configuration file of Switch A
#
sysname SwitchA
#
interface Ethernet0/0/0
ip address 10.10.10.1 255.255.255.0
#
lldp enable
#
snmp-agent trap enable feature-name lldptrap
#
lldp message-transmission interval 60
#
lldp message-transmission delay 9
#
lldp trap-interval 10
#
lldp management-address 10.10.10.1
#
return
l Configuration file of Switch B
#
sysname SwitchB
#
interface Ethernet0/0/0
ip address 10.10.10.2 255.255.255.0
#
lldp enable
#
snmp-agent trap enable feature-name lldptrap
#
lldp message-transmission interval 60
#
lldp message-transmission delay 9
#
lldp trap-interval 10
#
lldp management-address 10.10.10.2
#
return
Quidway S9300 Terabit Routing Switch
Configuration Guide - Network Management 4 LLDP Configuration
Issue 03 (2010-09-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4-21