8.5.3 Example for Configuring the Interconnection of FTP Servers and Devices in and out of the HGMP Cluster
(in Non-NAT Mode).....................................................................................................................................8-53
8.5.4 Example for Configuring Devices in the HGMP Cluster to Access the Outside SNMP Host (in NAT
Mode)............................................................................................................................................................8-63
8.5.5 Example for Configuring Devices in the HGMP Cluster to Access the Outside SNMP Host (in non-NAT
Mode)............................................................................................................................................................8-73
8.5.6 Example for Configuring the Batch Distribution Function for an HGMP Cluster..............................8-84
8.5.7 Example for Configuring the Batch Restart Function for an HGMP Cluster......................................8-95
8.5.8 Example for Configuring the Incremental Configuration Function for an HGMP Cluster...............8-104
8.5.9 Example for Configuring the Configuration Synchronization Function for an HGMP Cluster........8-114
8.5.10 Example for Configuring Security Features for an HGMP Cluster.................................................8-124
Quidway S9300 Terabit Routing Switch
Configuration Guide - Network Management Contents
Issue 03 (2010-09-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
xix
To Next Page
Loading...
