Features Provided by NQA
l Cooperates with the NM Station:
– The NM Station can completely manage all NQA functions.
– Supports the NQA MIB.
– Supports the Disman-traceroute-MIB.
– Supports the Disman-NSLookUp-MIB.
– Supports the Disman-ping-MIB.
l Supports multiple types of tests:
– ICMP test
– FTP test
– HTTP test
– DNS test
– Traceroute test
– SNMP test
– TCP test
– UDP test
– ICMP Jitter test
– UDP Jitter test
– LSP Ping test
– LSP Traceroute test
– LSP Jitter test
– MTrace test
– PWE3 Ping test
– PWE3 Trace test
– MAC Ping test
– ICMP Jitter test
– Path Jitter test
– VPLS Mping test
– VPLS Mtrace test
l Jitter tests support the continuous sending of 3000 packets and support voice traffic
simulation.
l Supports 2000 tests.
l Supports statistics collection at the millisecond level.
l Supports hot backup:
This function implements the synchronization of the configurations of NQA tests between
the master control board and the slave board. Therefore, after the master/slave switchover,
NQA tests can be performed normally.
l Supports test task scheduling:
Implements the scheduling of test tasks to decrease the concurrent tasks on the device.
Supports the configuration of different start time and end time for a single test:
Quidway S9300 Terabit Routing Switch
Configuration Guide - Network Management 6 NQA Configuration
Issue 03 (2010-09-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6-7
To Next Page
Loading...
