Huawei Quidway S9300

Procedure
Step 1 Run the display nqa results [ test-instance admin-name test-name ] command to check test
results on the NQA client.
----End
Example
If the path jitter test succeeds, you can view the following information by running the display
nqa results command.
<Quidway> display nqa results test-instance admin pathjitter
NQA entry(admin, pathjitter) :testflag is inactive ,testtype is pathjitter
Current Status:CLOSE
1 . Test 1 result The test is finished
Trace Completion Status:success
1 . Hop 1
Destination ip address:13.1.1.2
Jitter Completion Status:success Jitter Finish Status:finished
SendProbe:60 ResponseProbe:60
Min/Max/Avg/Sum RTT:1/4/2/115 RTT Square Sum:235
NumOfRTT:60 Drop operation number:0
Operation sequence errors number:0 RTT Stats errors number:0
System busy operation number:0 Operation timeout number:0
Min Positive SD:1 Min Positive DS:1
Max Positive SD:3 Max Positive DS:2
Positive SD Number:18 Positive DS Number:13
Positive SD Sum:20 Positive DS Sum:14
Positive SD Square Sum :26 Positive DS Square Sum :16
Min Negative SD:1 Min Negative DS:1
Max Negative SD:3 Max Negative DS:2
Negative SD Number:18 Negative DS Number:13
Negative SD Sum:21 Negative DS Sum:14
Negative SD Square Sum :29 Negative DS Square Sum :16
Max Delay SD:2 Max Delay DS:1
Average of Jitter:1 NumberOfOWD:60
Average of Jitter SD:1 Average of Jitter DS:1
jitter out value:0.4414088 jitter in value:0.3527651
OWD SD Sum:52 OWD DS Sum:3
2 . Hop 2
Destination ip address:110.1.1.1
Jitter Completion Status:failed Jitter Finish Status:finished
SendProbe:60 ResponseProbe:0
Min/Max/Avg/Sum RTT:0/0/0/0 RTT Square Sum:0
NumOfRTT:0 Drop operation number:0
Operation sequence errors number:0 RTT Stats errors number:0
System busy operation number:0 Operation timeout number:60
Min Positive SD:0 Min Positive DS:0
Max Positive SD:0 Max Positive DS:0
Positive SD Number:0 Positive DS Number:0
Positive SD Sum:0 Positive DS Sum:0
Positive SD Square Sum :0 Positive DS Square Sum :0
Min Negative SD:0 Min Negative DS:0
Max Negative SD:0 Max Negative DS:0
Negative SD Number:0 Negative DS Number:0
Negative SD Sum:0 Negative DS Sum:0
Negative SD Square Sum :0 Negative DS Square Sum :0
Max Delay SD:0 Max Delay DS:0
Average of Jitter:0 NumberOfOWD:0
Average of Jitter SD:0 Average of Jitter DS:0
jitter out value:0.0000000 jitter in value:0.0000000
OWD SD Sum:0 OWD DS Sum:0
Quidway S9300 Terabit Routing Switch
Configuration Guide - Network Management 6 NQA Configuration
Issue 03 (2010-09-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6-71