EasyManua.ls Logo

Huawei Quidway S9300

Huawei Quidway S9300
630 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
# Enable the NQA client and create an NQA Jitter test.
<SwitchA> system-view
[SwitchA] nqa test-instance admin jitter
[SwitchA-nqa-admin-jitter] test-type jitter
[SwitchA-nqa-admin-jitter] destination-address ipv4 10.2.1.2
[SwitchA-nqa-admin-jitter] destination-port 9000
Step 4 Perform the test.
[SwitchA-nqa-admin-jitter] start now
Step 5 Verify the test result.
[SwitchA-nqa-admin-jitter] display nqa results test-instance admin jitter
NQA entry(admin, jitter) :testflag is inactive ,testtype is jitter
1 . Test 1 result The test is finished
SendProbe:60 ResponseProbe:60
Completion:success RTD OverThresholds number:0
Min/Max/Avg/Sum RTT:1/98/8/461 RTT Square Sum:23037
NumOfRTT:60 Drop operation number:0
Operation sequence errors number:0 RTT Stats errors number:0
System busy operation number:0 Operation timeout number:0
Min Positive SD:1 Min Positive DS:1
Max Positive SD:96 Max Positive DS:8
Positive SD Number:15 Positive DS Number:8
Positive SD Sum:172 Positive DS Sum:18
Positive SD Square Sum :9868 Positive DS Square Sum :86
Min Negative SD:1 Min Negative DS:1
Max Negative SD:20 Max Negative DS:10
Negative SD Number:18 Negative DS Number:8
Negative SD Sum:163 Negative DS Sum:28
Negative SD Square Sum :2519 Negative DS Square Sum :194
Max Delay SD:49 Max Delay DS:48
Min Delay SD:0 Min Delay DS:0
Avg Delay SD:3 Avg Delay DS:3
Packet Loss SD:0 Packet Loss DS:0
Packet Loss Unknown:0 jitter out value:5.1291060
jitter in value:0.6602845 NumberOfOWD:60
OWD SD Sum:206 OWD DS Sum:195
----End
Configuration Files
l Configuration file of Switch A
#
sysname SwitchA
#
vlan batch 100
#
interface Vlanif100
ip address 10.1.1.1 255.255.255.0
#
interface GigabitEthernet1/0/0
port hybrid pvid vlan 100
port hybrid untagged vlan 100
#
nqa test-instance admin jitter
test-type jitter
destination-address ipv4 10.2.1.2
destination-port 9000
#
ip route-static 10.2.1.0 255.255.255.0 10.1.1.2
#
return
l Configuration file of Switch B
Quidway S9300 Terabit Routing Switch
Configuration Guide - Network Management 6 NQA Configuration
Issue 03 (2010-09-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6-161

Table of Contents

Other manuals for Huawei Quidway S9300

Related product manuals