Huawei Quidway S9300

Min Negative SD:0 Min Negative DS:0
Max Negative SD:0 Max Negative DS:0
Negative SD Number:0 Negative DS Number:0
Negative SD Sum:0 Negative DS Sum:0
Negative SD Square Sum :0 Negative DS Square Sum :0
Min Delay SD:0 Min Delay DS:0
Avg Delay SD:0 Avg Delay DS:0
Max Delay SD:0 Max Delay DS:0
Packet Loss SD:0 Packet Loss DS:0
Packet Loss Unknown:0 Average of Jitter:0
Average of Jitter SD:0 Average of Jitter DS:0
jitter out value:0.0000000 jitter in value:0.0000000
NumberOfOWD:0 OWD SD Sum:0
OWD DS Sum:0 RTT average: 0
Packet Loss Ratio: 0 MOS-CQ value:0.00
ICPIF value:0
----End
Configuration Files
l Configuration file of Switch A
#
sysname SwitchA
#
vlan batch 11
#
interface GigabitEthernet2/0/1
port hybrid pvid vlan 11
port hybrid untagged vlan 11
#
cfm enable
#
cfm md test
ma test
map vlan 11
mep mep-id 11 interface GigabitEthernet2/0/1 outward
remote-mep mep-id 12 mac 00e0-fc88-aaaa
#
nqa test-instance admin macping
test-type macping
destination mac 00e0-fc01-aaaa
md test ma test
#
return
l Configuration file of Switch B
#
sysname SwitchB
#
vlan batch 11
#
interface GigabitEthernet2/0/1
port hybrid pvid vlan 11
port hybrid untagged vlan 11
#
cfm enable
#
cfm md test
ma test
map vlan 11
mep mep-id 12 interface GigabitEthernet2/0/1 outward
remote-mep mep-id 11 mac 0000-0000-0010
#
return
6 NQA Configuration
Quidway S9300 Terabit Routing Switch
Configuration Guide - Network Management
6-164 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 03 (2010-09-20)