Huawei Quidway S9300

[SwitchA-nqa-admin-lspjitter] start now
Step 6 View the test results.
[SwitchA-nqa-admin-lspjitter] display nqa results test-instance admin lspjitter
SendProbe:60 ResponseProbe:60
Completion :success RTD OverThresholds number:0
Min/Max/Avg/Sum RTT:1/1/1/60 RTT Square Sum:60
NumOfRTT:60 Drop operation number:0
Operation sequence errors number:0 RTT Stats errors number:0
System busy operation number:0 Operation timeout number:0
Min Positive SD:0 Max Positive SD:0
Positive SD Number:0 Positive SD Sum:0
Positive SD Square Sum :0 Min Negative SD:0
Max Negative SD:1 Negative SD Number:1
Negative SD Sum:1 Negative SD Square Sum :1
Packet Loss Unknown:0 Average of Jitter SD:1
jitter out value:0.0162967
----End
Configuration Files
l Configuration file of Switch A
#
sysname SwitchA
#
vlan batch 100
#
mpls lsr-id 1.1.1.9
mpls
mpls te
mpls rsvp-te
mpls te cspf
#
interface Vlanif100
ip address 10.1.1.1 255.255.255.0
mpls
mpls te
mpls te bandwidth max-reservable-bandwidth 10000
mpls te bandwidth bc0 5000
mpls rsvp-te
#
interface GigabitEthernet1/0/0
port hybrid pvid vlan 100
port hybrid untagged vlan 100
#
interface LoopBack1
ip address 1.1.1.9 255.255.255.255
#
interface Tunnel1/0/0
ip address unnumbered interface LoopBack1
tunnel-protocol mpls te
destination 3.3.3.9
mpls te tunnel-id 100
mpls te bandwidth ct0 3000
mpls te commit
#
ospf 1
opaque-capability enable
area 0.0.0.0
network 10.1.1.0 0.0.0.255
network 1.1.1.9 0.0.0.0
mpls-te enable
#
nqa test-instance admin lspjitter
test-type lspjitter
lsp-type te
lsp-tetunnel Tunnel1/0/0
Quidway S9300 Terabit Routing Switch
Configuration Guide - Network Management 6 NQA Configuration
Issue 03 (2010-09-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6-173