Huawei Quidway S9300

Input Packet Count:9849 Output Packet Count:9429
Input Rate(pps): 0xffffffff Output Rate(pps): 0xffffffff
Input Loss Rate: 0xffffffff SG Loss Rate: 0xffffffff
3 . Hop 3
Outgoing Interface Address: 11.1.2.2
Incoming Interface Address: 11.1.0.1
Prehop Router Address: 0.0.0.0
Protocol : PIM Forward Code:NO_ERROR
Forward Ttl:1 Current Path Ttl:2
SG Packet Count:0xffffffff Hop Time Delay(ms): 0xffffffff
Input Packet Count:109581 Output Packet Count:16529
Input Rate(pps): 0xffffffff Output Rate(pps): 0xffffffff
Input Loss Rate: 0xffffffff SG Loss Rate: 0xffffffff
----End
Configuration Files
l Configuration file of Switch A
#
sysname SwitchA
#
multicast routing-enable
#
vlan batch 110 170
#
interface Vlanif110
ip address 11.1.5.1 255.255.255.0
pim sm
#
interface Vlanif170
ip address 11.1.6.3 255.255.255.0
igmp enable
pim sm
#
interface GigabitEthernet1/0/0
port hybrid pvid vlan 110
port hybrid untagged vlan 110
#
interface GigabitEthernet3/0/0
port hybrid pvid vlan 170
port hybrid untagged vlan 170
#
ospf 1
area 0.0.0.0
network 11.1.5.0 0.0.0.255
network 11.1.6.0 0.0.0.255
#
pim
#
return
l Configuration file of Switch B
#
sysname SwitchB
#
multicast routing-enable
#
vlan batch 120 160 170
#
interface Vlanif120
ip address 11.1.4.1 255.255.255.0
pim sm
#
interface Vlanif160
ip address 11.1.3.1 255.255.255.0
pim sm
#
6 NQA Configuration
Quidway S9300 Terabit Routing Switch
Configuration Guide - Network Management
6-196 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 03 (2010-09-20)