Huawei Quidway S9300

Max Positive Jitter: 0 Max Negative Jitter: 0
Positive Jitter Num: 0 Negative Jitter Num: 0
Positive Jitter Sum: 0 Negative Jitter Sum: 0
Positive Jitter Square Sum: 0 Negative Jitter Square Sum: 0
Packet Loss: 0 Packet Loss Ratio: 0
Destination ip address:40.1.1.2
Min/Max/Average Completion Time: 60/110/86
Sum/Square-Sum Completion Time: 260/23800
Average Single-Way Completion Time: 30
Last Good Probe Time: 2008-9-29 14:38:48.2
----End
Configuration Files
l Configuration file of CE-A
#
sysname CE-A
#
vlan batch 110
#
interface Vlanif110
ip address 100.1.1.1 255.255.255.0
#
interface GigabitEthernet1/0/0
port hybrid pvid vlan 110
port hybrid untagged vlan 110
#
return
l Configuration file of U-PE1
#
sysname U-PE1
#
mpls lsr-id 1.1.1.9
mpls
#
mpls l2vpn
#
mpls ldp
#
mpls ldp remote-peer 3.3.3.9
remote-ip 3.3.3.9
#
vlan batch 110 120
#
interface Vlanif110
mpls l2vc 3.3.3.9 100
#
interface Vlanif120
ip address 10.1.1.1 255.255.255.0
mpls
mpls ldp
#
interface GigabitEthernet1/0/0
port hybrid pvid vlan 110
port hybrid untagged vlan 110
#
interface GigabitEthernet2/0/0
port hybrid pvid vlan 120
port hybrid untagged vlan 120
#
interface LoopBack0
ip address 1.1.1.9 255.255.255.255
#
nqa test-instance test pwe3ping
test-type pwe3ping
local-pw-id 100
Quidway S9300 Terabit Routing Switch
Configuration Guide - Network Management 6 NQA Configuration
Issue 03 (2010-09-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6-211