EasyManua.ls Logo

Huawei Quidway S9300

Huawei Quidway S9300
630 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Step 2 Configure a PWE3 Trace test of the single-hop PW.
# Configure PE-A.
<PE-A> system-view
[PE-A] nqa test-instance test pwe3trace
[PE-A -nqa-test-pwe3trace] test-type pwe3trace
[PE-A -nqa-test-pwe3trace] local-pw-type vlan
[PE-A -nqa-test-pwe3trace] local-pw-id 100
Step 3 Perform the test.
[PE-A -nqa-test-pwe3trace] start now
Step 4 Verify the test result.
Run the display nqa history command on the PE device, and you can see that the status is
successful.
[PE-A-nqa-test-pwe3trace] display nqa history
NQA entry(test, pwe3trace)
history:
Index T/H/P Response Status Address Time
1 1/1/1 4 success 10.1.1.2 2006-9-30 9:33:3.301
2 1/1/2 5 success 10.1.1.2 2006-9-30 9:33:3.307
3 1/1/3 3 success 10.1.1.2 2006-9-30 9:33:3.311
4 1/2/1 6 success 3.3.3.9 2006-9-30 9:33:3.318
5 1/2/2 6 success 3.3.3.9 2006-9-30 9:33:3.324
6 1/2/3 6 success 3.3.3.9 2006-9-30 9:33:3.331
After running the display nqa results command on the PE device, you can see that the test is
successful.
[PE-A-nqa-test- pwe3trace] display nqa results
NQA entry(test, pwe3trace) :testFlag is inactive ,testtype is pwe3trace
1 . Test 1 result The test is finished
Completion:success Attempts number:1
Disconnect operation number:0 Operation timeout number:0
System busy operation number:0 Connection fail number:0
Operation sequence errors number:0 RTT Stats errors number:0
Drop operation number:0
Last good path Time:2006-9-24 11:22:21.2
1 . Hop 1
Send operation times: 3 Receive response times: 3
Min/Max/Average Completion Time: 1050/1090/1053
Sum/Square-Sum Completion Time: 3160/3331000
RTD OverThresholds number: 0
Last Good Probe Time: 2006-9-24 11:22:17.2
Destination ip address:10.1.1.2
2 . Hop 2
Send operation times: 3 Receive response times: 3
Min/Max/Average Completion Time: 1050/1490/1323
Sum/Square-Sum Completion Time: 3970/5367500
RTD OverThresholds number: 0
Last Good Probe Time: 2006-8-24 11:22:21.2
Destination ip address:10.2.2.2
----End
Configuration Files
l Configuration file of CE-A
#
sysname CE-A
#
vlan batch 110
#
interface Vlanif110
6 NQA Configuration
Quidway S9300 Terabit Routing Switch
Configuration Guide - Network Management
6-216 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 03 (2010-09-20)

Table of Contents

Other manuals for Huawei Quidway S9300

Related product manuals