Huawei Quidway S9300

Prerequisite
The configurations of the MIB-View-based Access Control in SNMPv1 are complete.
Procedure
l Run the display snmp-agent mib-view command to view the MIB view.
l Run the display snmp-agent community command to view the community name of the
agent.
l Run the display snmp-agent sys-info version command to view the SNMP version
information.
----End
Example
Run the display snmp-agent mib-view command. If information on the MIB view is displayed,
it means that the configuration succeeds.
<Quidway> display snmp-agent mib-view
View name:ViewDefault
MIB Subtree:internet
Subtree mask:
Storage-type: nonVolatile
View Type:included
View status:active
View name:ViewDefault
MIB Subtree:snmpUsmMIB
Subtree mask:
Storage-type: nonVolatile
View Type:excluded
View status:active
View name:ViewDefault
MIB Subtree:snmpVacmMIB
Subtree mask:
Storage-type: nonVolatile
View Type:excluded
View status:active
View name:ViewDefault
MIB Subtree:snmpModules.18
Subtree mask:
Storage-type: nonVolatile
View Type:excluded
View status:active
Run the display snmp-agent community command. If information on the community name is
displayed, it means that the configuration succeeds.
<Quidway> display snmp-agent community
Community name:public
Group name:public
Storage-type: nonvolatile
Community name:private
Group name:private
Storage-type: nonvolatile
Run the display snmp-agent sys-info version command to display the version of SNMP run
on the agent.
<Quidway> display snmp-agent sys-info version
SNMP version running in the system:
SNMPv1 SNMPv3
1 SNMP Configuration
Quidway S9300 Terabit Routing Switch
Configuration Guide - Network Management
1-20 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 03 (2010-09-20)